Now all aluminum with hyper-fast recharge makes this our most popular upgrade! The reactive trigger actually pushes your finger back after firing each shot! Shootdown is gone forever and the gas flows into the chamber so fast you can feel the valve heat up after a long string. Comes with everything you see here and is a direct replacement for the standard Mag valve. Slide it right in and go to town! Comes standard with LvL10 upgrade!
Warning: The X-Valve will not fit into an Automag RT. (It WILL fit an RT Pro.) If you have an RT, please do NOT order an X-Valve.
The X-valve will only run on compressed air or Nitrogen - not CO2. If you have a Hopper Left Minimag with the original short (4") hose, you will need a reverse X-Valve. If you are going to use the X-Valve in an Emag or RT Pro, KEEP YOUR ON/OFF ASSEMBLY. The assembly provided with the valve kit will have the wrong size on/off pin for your marker. Requires Fine Tuning of the Level 10.